Search another area
Metro area · United States

Lewiston-Auburn, ME, United States

20.6GWh
every year, from one 325-watt panel on each of 54,464 buildings.

What that is equal to

🏠 1,960
homes powered for a year
at the US average of 10,500 kWh per household
🌍 7,637 t
CO₂ avoided annually
displacing grid power at 0.371 kg CO₂e/kWh (EPA eGRID)
🚗 1,660
cars taken off the road
an average passenger vehicle emits 4.6 t CO₂e a year
⚡ 58.8 million
electric vehicle miles
at roughly 0.35 kWh per mile

The pay-off

It pays for itself here. A panel on this roof delivers electricity at 10.1¢ a kWh against a local price of 28.6¢ — 65% cheaper than local power. The install is repaid after 8.5 years, inside the panel's 25-year life.
10.1¢ vs 28.6¢
cost per kWh: this panel vs the grid
levelised over 25 years including 0.5%/yr degradation
$49 million
to fit every building here
54,464 panels at $900 installed each
8.5 years
to break even
saving $5.89 million a year area-wide at today's price

Assumes $900 to install one 325 W panel — hardware, mounting, microinverter, electrical work, labour and permitting — repaid only by the electricity it avoids buying. No subsidies, tax credits, net-metering premium, financing cost or future price rises are counted, and the figure is undiscounted. Electricity price is the ME residential average (EIA, May 2026). A single panel is unusually expensive per watt because it carries a whole array's fixed costs, which is why these numbers look worse than rooftop solar generally does.

How this is calculated

Buildings with roofs54,464
×  Panel rating325 W
×  Annual yield per panel here378.0 kWh
Annual generation20,584,619 kWh
Assumptions and limitations
  • Yield is specific to this location: 378.0 kWh per panel per year, from NASA POWER climatology transposed onto a tilted roof plane. The same panel makes roughly 596 kWh in Phoenix and 265 kWh in Anchorage.
  • Assumes a south-facing roof at a typical residential pitch, with a ~22% total system loss for soiling, shading, wiring, inverter, and heat.
  • Counts every above-ground structure with a footprint of at least 20 m², so garages and outbuildings are excluded but barns and sheds of real size are not. Building data is machine-derived and imperfect.
  • No account is taken of roof orientation, obstructions, structural condition, or whether the owner wants a panel.

Places like Lewiston-Auburn, ME

Bloomsburg-Berwick, PA · 20.3 GWhRussellville, AR · 24.3 GWhNew Castle, PA · 20.5 GWhLaGrange, GA-AL · 24.7 GWhRoanoke Rapids, NC · 23.9 GWhSomerset, PA · 20.6 GWh