Search another area
Metro area · United States

Pittsburgh, PA, United States

447GWh
every year, from one 325-watt panel on each of 1,200,221 buildings.

What that is equal to

🏠 42.6 thousand
homes powered for a year
at the US average of 10,500 kWh per household
🌍 166 thousand t
CO₂ avoided annually
displacing grid power at 0.371 kg CO₂e/kWh (EPA eGRID)
🚗 36.1 thousand
cars taken off the road
an average passenger vehicle emits 4.6 t CO₂e a year
⚡ 1.28 billion
electric vehicle miles
at roughly 0.35 kWh per mile

The pay-off

It pays for itself here. A panel on this roof delivers electricity at 10.2¢ a kWh against a local price of 21.6¢ — 52% cheaper than local power. The install is repaid after 11.5 years, inside the panel's 25-year life.
10.2¢ vs 21.6¢
cost per kWh: this panel vs the grid
levelised over 25 years including 0.5%/yr degradation
$1.08 billion
to fit every building here
1,200,221 panels at $900 installed each
11.5 years
to break even
saving $96.4 million a year area-wide at today's price

Assumes $900 to install one 325 W panel — hardware, mounting, microinverter, electrical work, labour and permitting — repaid only by the electricity it avoids buying. No subsidies, tax credits, net-metering premium, financing cost or future price rises are counted, and the figure is undiscounted. Electricity price is the PA residential average (EIA, May 2026). A single panel is unusually expensive per watt because it carries a whole array's fixed costs, which is why these numbers look worse than rooftop solar generally does.

How this is calculated

Buildings with roofs1,200,221
×  Panel rating325 W
×  Annual yield per panel here372.8 kWh
Annual generation447,486,964 kWh
Assumptions and limitations
  • Yield is specific to this location: 372.8 kWh per panel per year, from NASA POWER climatology transposed onto a tilted roof plane. The same panel makes roughly 596 kWh in Phoenix and 265 kWh in Anchorage.
  • Assumes a south-facing roof at a typical residential pitch, with a ~22% total system loss for soiling, shading, wiring, inverter, and heat.
  • Counts every above-ground structure with a footprint of at least 20 m², so garages and outbuildings are excluded but barns and sheds of real size are not. Building data is machine-derived and imperfect.
  • No account is taken of roof orientation, obstructions, structural condition, or whether the owner wants a panel.

Places like Pittsburgh, PA

St. Louis, MO-IL · 538 GWhCharlotte-Concord-Gastonia, NC-SC · 573 GWhTampa-St. Petersburg-Clearwater, FL · 615 GWhSan Juan-Bayamón-Caguas, PR · 536 GWhBaltimore-Columbia-Towson, MD · 433 GWhPortland-Vancouver-Hillsboro, OR-WA · 395 GWh